| Grade |
Features |
Typical Uses |
|
 Standard
|
| 2010 |
Super
high-impact grade. Highest molecular weight
category. |
Ski binding
parts, clips |
| SH210 |
Similar to 2010,
but comparable to Tenac-C copolymer in
molding-process thermal stability. |
Ski binding
parts, clips |
| 3010 |
High-impact,
high-elongation grade. 2nd-highest molecular
weight category. |
Ski binding
parts, rollers |
| SH310 |
Similar to 3010,
but comparable to Tenac-C copolymer in
molding-process thermal stability. |
Ski binding
parts, rollers |
| 4010 |
High-impact,
high-elongation grade. Medium viscosity. |
Tape recorder
and VCR parts, seat belt parts |
| SH410 |
Similar to 4010,
but comparable to Tenac-C copolymer in
molding-process thermal stability. |
Tape recorder
and VCR parts, seat belt parts |
| 4060 |
Medium-viscosity
grade with reduced sliding noise. |
Motor parts |
| 5010 |
General-purpose
grade. Balanced flowability and mechanical
properties. |
Gears, cams |
| SH510 |
Similar to 5010,
but comparable to Tenac-C copolymer in
molding-process thermal stability. |
Gears, cams |
| 7010 |
High-flow grade.
Suited for thin-wall, long-flow-distance
moldings. |
Fasteners,
aerosol valve parts, other multi-cavity molded
parts |
| SH710 |
Similar to 7010,
but comparable to Tenac-C copolymer in
molding-process thermal stability. |
Fasteners,
aerosol valve parts, other multi-cavity molded
parts |
|
High
Cycle
|
| 5050 |
Standard-flow
grade with high crystallization rate for higher
productivity. |
Tape recorder
and VCR parts, seat belt parts, gears |
| 7050 |
High-flow grade
with high crystallization rate for higher
productivity. |
Cassette hubs,
other multi-cavity molded parts |
| 7054 |
Modified version
of 7050, with added characteristics required for
VCR reels. |
VCR reels |
| 9054 |
Super high-flow
grade with high crystallization rate for higher
productivity. |
Floppy disk
parts |
|
Weather
Resistant
|
| 3013A |
High-viscosity
grade containing UV absorber and other additives
for superior weatherability. |
Pipe fittings,
rollers, exterior automotive parts |
| 4013A |
Medium-viscosity
grade containing UV absorber and other additives
for superior weatherability. |
Handles
and other interior automotive parts |
| 5013A |
Standard-flow
grade containing UV absorber and other additives
for superior weatherability. |
Door handles,
mirror bases |
|
Glass
Reinforced
|
| GA510 |
10% GF-filled
grade. Superior dimensional stability. |
Chassis, levers |
| GA520 |
20% GF-filled
grade. High-stiffness and superior dimensional
stability. |
Switch bodies |
| GN705 |
25% GF-filled
grade. High stiffness and high strength. |
Automotive
switch bodies, rollers, pump parts |
|
High
Lubricity
|
| LT802 |
High impact,
high elongation. Excellent friction and wear on
metals. |
Gears, rollers,
bearings |
| LT804 |
Medium-viscosity.
Excellent friction and wear on metals. |
Keyboard parts,
bearings for office machine, gears |
| LT200 |
High-lubricity
grade containing special lubricants. |
Bearings,
guide cams |
| FS410 |
Contains
fluoropolymer. Excellent friction and wear on
plastics. |
Speedometer
bearings |
| LA541/LA543 |
High-lubricity
grade. |
Gears, cams,
keyboard parts |
| LM511 |
Excellent
friction and wear on metals and plastics other
than POM. |
Keyboard parts,
bearings for office machine, gears |
| LS701 |
High-lubricity
grade containing silicone lubricants. |
Gears, cams,
rollers |
|
Impact
Resistant, Soft
|
| 4012 |
Medium-viscosity
grade. Reduced stiffness and increased
elongation through addition of special polymers. |
Hooks, press-fit
parts |
